QIXING / GLOBAL AUTOMATION
How a gantry robot manages buffers between two CNC machines.
Linked machining is not one long pick-and-place move. The gantry robot must coordinate two machine states, an intermediate buffer, part orientation, quality status and a recovery route that keeps the process understandable.
Map the complete route from raw part to operation one, transfer or reorientation, operation two and finished-part return. Each position needs an identity, an allowed part state and a clear rule for when it can accept the next workpiece.
A buffer decouples two CNC machines when their cycles do not finish at the same moment. Its capacity and location should be chosen from cycle variation, part cooling or cleaning needs, orientation and the available gantry travel.
Control logic must prevent mixed states: an unprocessed part cannot enter operation two, and a finished part cannot return to the raw queue. Sensors, program state and physical nests should support the same logic.
Recovery is part of the design. After a stop, the system needs to know which machine holds a part, what is in the buffer and which gripper is occupied before the gantry robot is allowed to resume.
Products